Today, most of the companies choose for automated procedure to manufacture perfume and sprayer bottles made of either glass or aluminum. Especially, these products are suitable for customized applications. In addition, development of machining for various glass perfume bottles peaked with advent of flow and feed machines have allowed manufacturers to go for bulk production nowadays, which was almost impossible before few years.
Bottle Machining and Container Type Production
If you go for classification of glass or aluminum bottles production, you will find two major categories, which are sheet production and container production. Bottle machining forms a part of the container type production process or require hot end process.
Hot End Procedure
Most of the experts associated with production of glass perfume bottles perform the manufacturing procedure in different steps. Particularly, every manufacturer follows an initial and the most important stage i.e. hot end procedure. This typically requires heat supply in big amount to produce as well as to shape any glass container.
Here, experts use furnace at the first stage for molding of molten glasses, which later on, fed to furnace in the form of glass feed stocks. Soda lime type of glass stocks would form major parts of the glass products and mainly consist of silica and few amounts of lime and calcium oxide. In addition, small amounts of ferric oxide, aluminum oxide, barium oxide and magnesia and sulfur oxide also form few percent of the entire soda-lime glass.
Press and Blow Formation
Once professionals complete with the hot end process in the beginning, they go ahead for press and blow formation in any particular section of IS machine. It is obviously the common type of method associated with production of glass container. IS machine contains minimum 5 to maximum 20 identical sections, all of them may carry out the forming procedure completely and simultaneously.
In this way, it allows for the production of maximum 20 containers by using a single machine simultaneously. According to experts involved in manufacturing of glass aromatherapy bottle or simple glass bottle, whenever the glass in molten state approaches very high degree that ranges from 1050 degree to up to 1200 degree Celsius, it comes in the plastic stage.
During this phase, manufacturers have to start with press and blow formation. In addition, shearing blade cuts and shapes the glass in cylindrical format to make gobs. Press and blow method is useful for glass containers, which have wide mouth.
Sky Sprayer 